.223 / 5.56 62 grain PRVI partizan load

Post your rifle loads here.

.223 / 5.56 62 grain PRVI partizan load

Postby Longdayjake » Sat Sep 12, 2009 5:56 pm

For this load I use the ss109 bullet that I sell on my website. I have gotten great results using several different powders with this.

62 grain PRVI ss109
any .223 / 5.56 casing
23.5 grains of whatever .223 powder I have on hand. I have gotten great results with AA 2230, IMR and H 4895, and most recently Ramshot Exterminator and TAC.
CCI small rifle primers

Obviously this is not a hot load by any means. I have used this load to shoot rockchucks at over 200 yards. It shoots sub moa from my rock river midlength AR and just under 1/2" from my buddy's stainless ruger bolt action. I have not shot a more accurate bullet from either of these rifles. This load did not perform well from a stainless 16" DPMS bull barrel upper. But then again I couldn't find a load that did so I sold that upper.
Longdayjake
Site Admin
 
Posts: 49
Joined: Wed Sep 02, 2009 3:46 pm

Re: .223 / 5.56 62 grain PRVI partizan load

Postby attila787 » Thu Jan 28, 2010 7:59 pm

I just bought some of these what is your overall length once the bullet is seated?
attila787
 
Posts: 1
Joined: Thu Jan 28, 2010 7:56 pm

Re: .223 / 5.56 62 grain PRVI partizan load

Postby Longdayjake » Fri Jan 29, 2010 8:48 am

That is actually a good question. It has been so long since I checked that I don't even know. I remeber just seating them deep enough to fit in the ar15 mag and calling it good.
Longdayjake
Site Admin
 
Posts: 49
Joined: Wed Sep 02, 2009 3:46 pm


Return to The Rifle Load

Who is online

Users browsing this forum: No registered users and 1 guest

cron